LPG噴霧干燥 返回列表頁

噴霧干燥機組是一種用離心式或壓力式霧化器，將溶液、懸浮液，乳濁液或漿料等料液霧化成細微液滴(表面積顯著增大)，經與熱風接觸得以急速干燥（幾秒到幾十秒），從而直接得到粉末產品的裝置。
as a main product of our company, spraying drying set is a kind of centrifugal or pressurized,which atomizes liquid materials such as solution,suspension,emulsion or paste into timy dr-oplet (surface area increased)and dry them into powder product an once(several to dozens of seconds)by contacying hot air.

工作原理 principle of operation

空氣通過加熱器轉化為熱空氣，進入裝置在干燥室頂部的熱風分配器，然后均勻的進入干燥室，同時通過無級調速的螺桿泵將料液送至裝置在干燥室頂部的霧化器，使料液霧化成極小的霧化液滴，料液和熱空氣并流接觸，水份迅速蒸發在極短的時間內干燥為成口若懸河，成品經干燥塔底部和旋風分離器排出，廢氣由風機抽出排空。

air is transfened into hot air by passing through the heater，and goesinto the hotair separator on the top of he dryer，then goes into the drying room evenly.at the same time liquid materials are sent to the centrifugal atomixer on the top of the dryer the the screw pump with stepless speed regulation，and atomized into timy dr-oplet which will contact hot air,then dried into dry product within shortest time. the finished product will be discharged by the whirlwind separator on the bottom of the drying tower and waste air is exhausted by airfan.

特性 featrues

a·干燥速度快，料液經霧化后，表面積大大音，在熱風氣流中瞬間就可蒸發65%-98%的水份，完成干燥時間僅需5-15秒，特別適用于熱敏性物料的干燥。
b·所得產品粒度均勻，流動性，速溶性良好，產品純度高，質量好。
c·操作簡單穩定，調節控制方便，容易實現自動化作業。
d·生產過程簡化，操作環境衛生條件*，能避免干燥過程中的粉塵飛揚。

a. fast drying speed.liquid materials after atomization will increase its surface area largely and can be evaporated its moisture 65% to 98% instamtly in the hot air flow so as to finish drying with in 5 to 15 seconds.it is specially suitable for drying of heatsensitive materials.
b. dried products have even granule,good flowability and solubility,high purity and good quality.
c. simple and stable opration,measy adjustment and control ad well as automation.
d. simplifying process of production.superior and sanitary operation environment,and flying dust can be avoided during the drying process.

應用范圍 scope of application

1·有機和無機化工物料
2·塑料樹脂
3·蛋奶制品及食品
4·調味香料
5·植物提取物及中成藥
6·西藥
7·陶瓷及建筑材料

1.organic and inorganicchemical raw materials
2· plastic resin
3· egg andmilk productand foodstuff
4· condimentand spicy
5· extractsofplantand chinesetraditionalmedicines
6· western medicines
7· porcelainand construction materials

訂貨須知 attentions to order

1·料液名稱，物性，含固量 (或含水量)粘度，表面張力，ph值。
2·干燥后粉料容重，允許殘余含水量，粒度，允許zui高溫度。
3·產量，每天開班時間。
4·可供能源的，蒸汽可供量;電容量;可供燃煤、油、汽量。
5·控制要求:進，出□溫度是否需要自控。
6·收粉要求:要否安裝袋式捕集器，環境對排放尾氣要求。

l.name ofliquid mate廿al5natu廠e solid content(o廠moistu廠e content)，viscosity，su優acetension，ph value·
2· volumet「icweightfaterdrying,allowableresidue moisture,granula「ity,allowed high temperature. 3· production ,totalshifthoursperday.
4· availbale energy resource and volume ofsteam,powersuppluy capacity,available voiumeofcoal,oiland steam.
5· controlrequirement:ifinletand outlettemperatureare needed automatic controlled.
6· requirementofpowdercollection:ifbag collectorisneeded to install,environmentalrequirementoftailgas.

1·空心過濾
2·料桶
3·莫諾泵
4·蒸汽加熱器
5·電加熱器
6·霧化器
7·熱風分配器
8·干燥塔·
9·風機
10·調風蝶閥
11·旋風除塵器

air filter
drum of raw material
mono-pump
steam heater
electric heater
atomizer
hot air distributor
drying tower
fan
air aduusting disc valve
cyclone duster