L.ADU PNEUMATIC
L.ADU PNEUMATIC
L.ADU基礎
LADU氣動直角
LADU Pneumaticinline
LADU Pneumaticgrip
LADU氣動
L.ADU BASIS RIGHT-ANGLED
有3種不同的電機版本可供選擇：55,56和57型
電機版本類型取決于所需的孔尺寸和材料堆疊
為了獲得更多的功率，還可以安裝渦輪電機
選擇合適的鎖定系統后，機器即可使用
LADU氣動
L.ADU BASIS INLINE
有3種不同的電機版本可供選擇：55,56和57型
電機版本類型取決于所需的孔尺寸和材料堆疊
為了獲得更多的功率，還可以安裝渦輪電機
選擇合適的鎖定系統后，機器即可使用
LADU氣動
L.ADU BASIS GRIP
有兩種不同的電機版本：55型和56型
電機版本類型取決于所需的孔尺寸和材料堆疊
為了獲得更多的功率，還可以安裝渦輪電機
選擇合適的鎖定系統后，機器即可使用
L.ADU鎖定系統
LADU氣動同心夾頭
LADU PneumaticTwistLock
LADU PneumaticC-Frame
LADU PneumaticTaperlock
LADU PneumaticTraverse
LADU PneumaticGeared Offset
LADU氣動
同心套（CC）
材料堆疊：CFRP |鈦|鋁
一次性鉆孔和反補丁
幾乎100％的芯片和粉塵排放
高達700 N的鎖模力
LADU氣動
扭鎖
材料堆疊：CFRP |鈦|鋁
一次性鉆孔和反補丁
可選芯片和灰塵排氣
沒有夾緊力
Kann hoheVorschubkräfteaufnehmen
帶有集成的快速更改索引
LADU氣動
C-FRAME
材料堆疊：CFRP |鈦|鋁
一次性鉆孔和counters孔
幾乎100％的芯片和粉塵排放
高達1.200 N的鎖模力
定位überPilotspitze im Gegenhalter
Bohrwerkzeug mit Pilotspitze或Bohrschablone
P型：Aufklappbarer Gegenhalterfüreinfache Positionierung | Materialschichtstärke：0-100毫米
J型：Kein aufklappbarer Gegenhalter，Bauteilklemmung durch Parallelhub | Materialschichtstärke：5-40毫米
LADU氣動
TAPERLOCK（TPL）
材料堆疊：CFRP |鈦|鋁
一次性鉆孔和反補丁
幾乎100％的芯片和粉塵排放
沒有夾緊力
LADU氣動
真空導線（VT）
材料堆疊：CFRP |鋁
一次性鉆孔和counters孔
幾乎100％的芯片和粉塵排放
高達1.000 N的夾緊力
LADU氣動
GEARED OFFSET（GO）
材料堆疊：CFRP |鈦|鋁
一次性鉆孔和counters孔
可選芯片和灰塵排氣
沒有夾緊力
L.ADU選項
LADU氣動圓形計數器
LADU PneumaticMQL-系統
LADU PneumaticSine-Feed
LADU Pneumatic快速更換系統
LADU Pneumatic快速更換索引
LADU氣動雙手握
LADU氣動
周期計數器
計算鉆井周期
數字LED顯示
鉆井周期信息導致的預防性維護
用磁針重置計數器
更多關于L.ADU選項
LADU氣動
MQL系統
為了*的鉆孔和表面質量
質量的冷卻液
恒定的微滴進料
冷卻液量可以單獨調整
易于補充
更多關于L.ADU選項
LADU氣動
SINE-FEED
LübberingsMirco-Peck解決方案正弦饋送將長芯片分解成微芯片
微芯片提供 的鉆孔質量
LübberingsSine-Feed甚至可以使用一次性鉆孔和counters孔
名稱“正弦進給”代表正弦波如主軸振動
將組裝到基礎機器中
也可以使用MQL系統（干式切割）
更多關于L.ADU選項
LADU氣動
快速更換系統
由于統一的界面，鎖定系統快速切換
良好的切割工具（如清潔）
低損傷 風險
更多關于L.ADU選項
LADU氣動
快速更改索引
與集成的快速更換系統快速更換鎖定系統
附加值：機器360°旋轉
只需拉動，轉動并釋放 - 機器就鎖定在所需的位置
輕松和舒適的處理
更多關于L.ADU選項
LADU氣動
雙手抓
雙手gip - 理想的高空作業
可用于基礎機器的內聯版本
更多關于L.ADU選項
L.ADU氣動 - 模塊標準程序
由于采用模塊化結構，可以單獨配置
3個基準機器，6個鎖定系統和6個附加選項的結果是超過100種不同的可能組合
根據鉆孔尺寸和工藝的不同，有不同的型號（直角，直列，夾緊）和電機類型（55,56,57型）
基礎機器（L.ADU基礎）與鎖定系統（L.ADU鎖定系統）一起準備使用
模塊化概念提供舒適的附加選項（L.ADU選項）
由于統一的接口（L.ADU快速更換系統），鎖定系統可以快速輕松地進行更改。
低維護：磨損和備件的 要求（<10％）
優化鉆孔質量：CFRP中不會出現分層 - 無鉆孔鉆孔
right-angled
inline
grip
L.ADU BASIS RIGHT-ANGLED
- available in 3 different motor versions: type 55, 56 and 57
- motor version type depends on required hole size and material stack
- for more power a turbine motor can also be fitted
- after selecting a suitable locking system, the machine is ready to use
L.ADU BASIS INLINE
- available in 3 different motor versions: type 55, 56 and 57
- motor version type depends on required hole size and material stack
- for more power a turbine motor can also be fitted
- after selecting a suitable locking system, the machine is ready to use
L.ADU BASIS GRIP
- available in 2 different motor versions: type 55 and 56
- motor version type depends on required hole size and material stack
- for more power a turbine motor can also be fitted
- after selecting a suitable locking system, the machine is ready to use
L.ADU locking systems
Concentric-Collet
TwistLock
C-Frame
Taperlock
Traverse
Geared Offset
CONCENTRIC COLLET (CC)
- material stacks: CFRP | titanium | aluminium
- one-shot drilling and countersinkung
- nearly 100 % chip and dust exhaust
- up to 700 N clamping force
TWIST LOCK
- material stacks: CFRP | titanium | aluminium
- one-shot drilling and countersinkung
- optional with chip and dust exhaust
- no clamping force
- Kann hohe Vorschubkräfte aufnehmen
- comes with an integrated Quick Change Indexing
C-FRAME
- material stacks: CFRP | titanium | aluminium
- one-shot drilling and countersinking
- nearly 100 % chip and dust exhaust
- up to 1.200 N clamping force
- Positioning über Pilotspitze im Gegenhalter
- Bohrwerkzeug mit Pilotspitze oder Bohrschablone
- Type P: Aufklappbarer Gegenhalter für einfache Positionierung | Materialschichtstärke: 0-100 mm
- Type J: Kein aufklappbarer Gegenhalter, Bauteilklemmung durch Parallelhub | Materialschichtstärke: 5-40 mm
TAPERLOCK (TPL)
- material stacks: CFRP | titanium | aluminium
- one-shot drilling and countersinkung
- nearly 100 % chip and dust exhaust
- no clamping force
VACUUM TRAVERSE (VT)
- material stacks: CFRP | aluminium
- one-shot drilling and countersinking
- nearly 100 % chip and dust exhaust
- up to 1.000 N clamping force
GEARED OFFSET (GO)
- material stacks: CFRP | titanium | aluminium
- one-shot drilling and countersinking
- optional with chip and dust exhaust
- no clamping force
L.ADU options
Circle-Counter
MQL-System
Sine-Feed
Quick Change System
Quick Change Indexing
Two-Hand-Grip
CYCLE COUNTER
- Counts the drilling cycles
- Digital LED display
- Preventive maintenance due to drill cycle information
- Reset the counter with the magnetic pin
More about L.ADU options
MQL SYSTEM
- For perfect drilling and surface quality
- Highest quality of coolant
- Constant feed of micro drops
- Quantity of coolant can be individually adjusted
- Easy to refill
More about L.ADU options
SINE-FEED
- Lübberings Mirco-Peck solution Sine-Feed breaks the long chips into micro chips
- Micro chips for perfect drilling quality
- Lübberings Sine-Feed is even possible with one-shot drilling and countersinking
- The name "Sine-Feed" stands for sine like spindle vibrations
- Will be assembled into the basis machine
- Also with MQL System possible (dry cutting)
More about L.ADU options
QUICK CHANGE SYSTEM
- Quick changeover of locking systems due to uniform interface
- Good access to the cutting tool (e.g. for cleaning)
- Low risk of damaging the cutting tool
More about L.ADU options
QUICK CHANGE INDEXING
- Quick exchange of locking systems with the integrated Quick Change System
- Additional value: 360° rotation of the machine
- Just pull, turn and release - and the machine is locked in the desired position
- Easy and comfortable handling
More about L.ADU options
TWO-HAND GRIP
- Two-hand gip - ideal for overhead work
- Available for inline version of the basis machine
More about L.ADU options
L.ADU PNEUMATIC – MODULAR STANDARD PROGRAM
- Can be individually configurated thanks to the modular structure
- The outcome of 3 basis machines, 6 locking systems und 6 additional options is over 100 different possible combinations
- Depending on the drilling size and process there are different models (right-angled, inline, grip) and motor types (type 55, 56, 57) available
- The basis machine (L.ADU basis) is together with the locking system (L.ADU locking system) ready to use
- The modular concept offers comfortable additional options (L.ADU options)
- The locking systems can be changed quickly and easily due to a uniform interface (L.ADU Quick Change System)
- Low maintenance: Minimum requirement of wear and spare parts (< 10%)
- Optimised Drilling Quality: no delamination in CFRP - burrless drilling
- Enormous time saving thanks to one-shot drilling and countersinking
- 品牌 型號
COREMO C_A074_KC52_3125403-M6017_DLZ001_EN_S1_R00_AP_A2 TYPE:D-3N A2606 LEFT HAND
COREMO C_A074_KC52_31421016-M1026_DLZ001_EN_S1_R00_AP_A2 reference:D2N-30/4-RH
Parker DXD06032
JOSEF EMMERICH 510SPPH 32521-aag-ck-032274
MSC Tuttlingen GmbH type: CC12-V ID:6335274
Haegglunds FG3777721
lubbering 80241504
lubbering 80280101
lubbering 80341103
lubbering 70280501
lubbering 70280502
優勢供應德國LUBBERING，LUBBERING裝備工具，手持槍輸出頭、LUBBERING擰緊裝配偏置工具、LUBBERING特殊頭,LUBBERING開口頭、LUBBERING閉口頭、LUBBERING擰緊槍頭
LUBBERING擰緊裝配偏置工具 LUBBERING擰緊裝配偏置工具 LUBBERING擰緊裝配偏置工具
SPECIAL OPEN HEAD|89131405
>luebbering SICOPOINT9090
>luebbering 89541202
>LUDWIG LEUCHTEN KG | moisture-proof light|BJ18 /TYPE 135NS GP; 1XT58 W >LEUCHTS;komp WG Does L58/84;230V/50Hz
>LUDECKE ESD9TLAB
>LUDECKE ESD14NA
>LUBE Card sets _207254, ??8
>lubbering 13MM sleeve gear 70914320
>lubbering 80280101
>lubbering 70280501
>lubbering 80241504
>LUBBERING SPECIAL OPEN HEAD|89131405
>LUBBERING sicopoint 9000
>LUBBERING 85134365
>LUBBERING 80929264
>lubbering 80341103
>lubbering 80341103
>lubbering 80280101
>lubbering 80241504
>lubbering 70280502
>lubbering 70280502
>lubbering 70280501
采購中心
