德國ENGEL ElektroMotoren GmbH直流電機
德國ELTRA GmbH分析儀
意大利Elettrotec S.r.l.壓力開關 真空開關
:王工
同號
449147851
價注意事項:
1.請發書面詢價函(郵件,,傳真等),不接受口頭報價。
2.如果型號不能*對上,請?zhí)峁┯⑽钠放泼?具體型號+數量。
3.詢價的商友請主動告知公司名稱和,謝謝。
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
CS-800
- Function & Features
- Information & Downloads
- Order Data & Quote Request
Generate Product Information PDF
Determination of carbon and sulfur is one of the most common applications in process control and laboratory. ELTRA’s CS-800 analyzer is designed for the precise, simultaneous determination of carbon and sulfur in inorganic samples from ppm level up to 10 % or more.
The CS-800 is equipped with an induction furnace for sample oxidation and can provide temperatures up to 2500 °C. The automated cleaning system for most convenient operation is included in the basic package of the analyzer.
The CS-800 can be supplied with up to four independent infrared cells. The respective cells with the appropriate path length and sensitivity can be individually selected to offer optimum precision for the analysis of high and low levels of both carbon and sulfur.
Application Examples
alloys, carbides, cast iron, cement, ceramics, copper, glass, iron, minerals, ores, refractory metals, sand, steel, titanium, ...
Product Advantages
- simultaneous carbon and sulfur determination with minimal sample preparation
- reduced analysis cost due to carrier gas conservation mode
- robust design allows usage in production control and laboratory
- rapid, precise, accurate and reliable element determination
- wide range of inorganic materials can be analyzed
- induction furnace provides temperatures up to 2500 °C
- customized infrared cells provide wide, dynamic measuring range
- automatic induction furnace cleaning
- powerful software (multilingual, customized display, export of results)
- single and multipoint calibration
- low maintenance
Features
Measured elements | carbon, sulfur |
Samples | inorganic |
Furnace alignment | horizontal |
Sample carrier | ceramic crucibles |
Field of application | construction materials, engineering / electronics, geology / mining, glass / ceramics, steel / metallurgy |
Furnace | induction furnace, ~ 2500 °C |
Detection method | solid state infrared absorption |
Number of IR cells | 1 - 4 |
Typical analysis time | 40 - 50 s |
Chemicals required | copper oxide, magnesium perchlorate, sodium hydroxide |
Gas required | compressed air (4 - 6 bar/ 60 - 90 psi) oxygen 99.5 % pure (2 - 4 bar / 30 - 60 psi) |
Power requirements | 230 V, 50/60 Hz, max. 15 A, 3450 W |
Dimensions (W x H x D) | 55 x 80 x 60 cm |
Weight | ~ 110 kg |
Required equipment | balance (resolution 0.0001g), monitor, PC |
Optional accessories | Autoloader (for 36 or 130 crucibles), carrier gas purification, halogen trap, HTF-540 pre-heating furnace, voltage stabilizer 5 KVA |
Our Products
GNM Series
The proven GNM 21 to GNM 80 series in industrial design is available in the standard voltage versions 12, 24 and 42 V, with torque ratings up to 1.6 Nm. Special voltages and mechanical adaptations are also available.
GNM Series with planetary gear units
The GNM series when used in combination with our planetary gear units represents a wide range of available reduction gears for coaxial applications where there is a need for high output torques.
GNM Series with worm gear units
When used in combination with the worm gear series G1 to G3, the GNM Series offers a cost-effective power turn at 90° with a large variety of ratios.
Baureihe VGM NEU
Die neue Baureihe VGM 31 bis VGM 80 in Industrieausführung steht standardmäßig in Spannungsvarianten 24V und 42V zur Verfügung. Die Nenndrehmomentbereiche reichen bis zu 1,6 Nm. Sonderspannungen und mechanische Anpassungen sind jederzeit möglich.
Baureihe VGM mit Planetengetriebe NEU
Die neue VGM Baureihe in Verbindung mit unseren Planetengetrieben bietet ein breites Spektrum an Untersetzergetrieben für koaxiale Anwendungsfälle bei denen hohe Abtriebsdrehmomente gefordert sind.
GNM Series
DC Motors with permanent magnet field
The proven GNM 21 to GNM 80 series in industrial design is available in the standard voltage versions 12, 24 and 42 V, with torque ratings up to 1.6 Nm. Special voltages and mechanical adaptations are also available..
- Proven technology in a robust industrial design
- Permanent magnetic field for high efficiency
- Bar-wound armature design for high dynamics
- High variability through various attachments
Typ | Nenn- spannung [VDC] | Nenn- strom [ADC] | Nenndreh- moment [Nm] | Nenn- drehzahl [min-1] | Nenn- leistung [W] | Gehäuse-Ø [mm] |
---|---|---|---|---|---|---|
GNM 2130C | 12 / 24 | 1,7 | 0,0175 | 6000 | 11 | 34 |
GNM 2145C | 12 / 24 | 2,2 | 0,0255 | 6000 | 16 | 34 |
GNM 2636A | 24 | 1,6 | 0,07 | 3000 / 4000 | 22 | 45 |
GNM 2670A | 24 | 2,6 | 0,127 | 3000 / 4000 | 40 | 45 |
GNM 3125 | 24 / 42 | 2 | 0,096 | 3000 / 4000 | 30 | 55 |
GNM 3150 | 24 / 42 | 3,1 | 0,175 | 3000 / 4000 | 55 | 55 |
GNM 3175 | 24 / 42 | 4,1 | 0,239 | 3000 / 4000 | 75 | 55 |
GNM 4125A | 24 / 42 | 3,6 | 0,191 | 1600 / 3000 | 60 | 70 |
GNM 4150A | 24 / 42 | 5,5 | 0,318 | 1600 / 3000 | 100 | 70 |
GNM 4175A | 24 / 42 | 7,5 | 0,446 | 1600 / 3000 | 140 | 70 |
GNM 5440E | 24 / 42 | 8,3 | 0,477 | 3000 | 150 | 83 |
GNM 5480E | 24 / 42 | 12,9 | 0,796 | 1600 / 3000 | 250 | 83 |
GNM 8035/4 | 24 | 15,2 | 0,9 | 3000 | 280 | 110 |
GNM 8070/4 | 24 | 27 | 1,6 | 3000 | 500 | 110 |